Mission Statement
"To improve the taste and quality of your water through the supply and maintenance of state of the art water filtration at an affordable price".
We supply and install water filter systems for domestic, commercial and industrial applications.
We also supply replacement filters to suit most current systems.
| Address: |
||
| 18 Acacia Grove Pascoe Vale South 3044 Victoria Australia |
Phone: +61 3 9383-6940 Fax: +61 3 9383-7636 Email: hydroclear@bigpond.com |
|
| Contact: |
||
| Geoff Exner | Mobile: 0414 727 001 |
|


B7,B9 Specifications
Water reservoir
Both dispensers have stainless steel tanks which hold approximately
1.8 litres of chilled water during normal usage. Each has a chilling capacity
of 5 L.P.H. during peak periods.
Refrigeration
System B7 uses 50 gms and system B9 uses 75 gms of refrigerant H134A which
is non-toxic, non-flammable and non-ozone depleting. Refrigerant flow is
controlled by a capillary tube which has no moving parts.
Temperature Control
The thermostat is factory preset.
Compressors
1/16 h.p. capacity, 49 watts. The compressor is hermetically sealed for
silent running.
Condenser
All steel tube and wire construction
Electrical
240 Volts, 50 Hz. A 2 metre house cable and 3 pin plug are supplied. Full
load current is 0.66 amps.Performance to ARI 1010-94 Standard
Inlet water 32.2°C
Outlet water 10°C
Ambient air 32.2°C
Weight-Packed
B7 - 24kg
B9 - 22kgDimensions
B7
Width - 370mm
Depth - 370mm
Height - 970mm
Cubic - 0.132m3Dimensions
B9
Width - 370mm
Depth - 370mm
Height - 590mm
Cubic - 0.080m3




A stainless steel tank holds approximately 1.8 litres of chilled water
during normal usage. The chilling capacity is 5 L.P.H. during peak periods.
A stainless steel tank holds approximately 1.8 litres of chilled water
during normal usage. The chilling capacity is 5 L.P.H. during peak periods.
Hot water reservoir
B8E - the hot water tank is of drawn stainless steel and is fitted with
a 750 watt heating element. It delivers 65 cups (150ml) per hour at plus
92°C.
B8M - The stainless steel hot water tank is fitted with a 500 watt element.
This model delivers 50 cups per hour at plus 85°C.
Hot tanks have drains fitted for easy cleaning and sterilisation. With the
aid of "clip on" brackets the tank is easily removed for service
(if required).
Each hot tank has it's components mechanically swaged together. As no fusion
welding is used the occurrence of pitting, crevice or galvanic corrosion
is prevented. Refrigeration
The system uses 50 gms of refrigerant H134A. It is non-toxic, non-flammable
and non-ozone depleting. Refrigerant flow is controlled by a capillary tube
which has no moving parts.
Temperature Control
The
thermostat is factory pre-set.
Compressor
1/16 h.p. capacity, 49 watts. The compressor is hermatically sealed for
silent running.
Condenser
All seel tube and wire construction.
Refrigeration
The system uses 50 gms of refrigerant H134A. It is non-toxic, non-flammable
and non-ozone depleting. Refrigerant flow is controlled by a capillary tube
which has no moving parts.Electrical
240 volts, 50Hz. A 2 metre house cable and 3 pin plug are supplied. Full
load current is 0.66 amps.
Temperature Control
Cold water - Thermostat is factory preset
Hot water - B8E - State-of-the-art Electronic Thermostat is factory preset
to 92°C at sea level. B8M - Mechanical Thermostat factory preset to 85°C
at sea level.
An "on / off" switch is provided on both models which can be
used to isolate the element in the hot tank.Performance to ARI 1010-94 Standard
Inlet water 32.2°C
Outlet water 10°C
Ambient air 32.2°C.
Weight packed
27kg.
Compressor
1/16 h.p. capacity, 49 watts. The compressor is hermatically sealed for
silent running.Dimensions packed
Width - 370mm
Depth - 370mm
Height - 970mm
Cubic - 0.132m3
Condenser
All seel tube and wire construction.

Electrical
240 volts, 50Hz. A 2 metre house cable is supplied. Full load for B8E is
3.76 amps and 2.74 amps for B8M.
Performance to ARI 1010-94 Standard
Inlet water 32.2°C
Outlet water 10°C
Ambient air 32.2°C
Weight packed
27kg.
Dimensions packed
Width - 370mm
Depth - 370mm
Height - 970mm
Cubic - 0.132m3
Five (5) years on the compressor
Please note: Hot & Cold Water Coolers
should not be used in areas where altitudes exceed 1000m above sea level.

M
- SERIES


UB1 UB2

P1 P2 P3


A Range
of Filters to Suit Most Applications:
Carbon Filters for the removal of chlorine, taste and smell.
Sediment filters for
the removal of dirt, rust, algae etc.
ARD filters to remove
Giardia & Cryptosporidium cysts.
Reverse Osmosis membranes
for the removal of over 98% of contaminants and heavy metals.